English

ALL THE CHARACTERISTICS OF KOMOBI CITY WITH

PROFESSIONAL METRICS

- GPS tracker motorcycle device of security with anti-theft and driving telemetry -

NO MOTORCYCLE BATTERY CONSUMPTION

The device has its own battery that recharges itself when the motorcycle is started

EASY AND FAST INSTALLATION

Install yourself without to go to the garage

MILEAGE AND TIME

SPEED

GAS/BRAKE

INCLINATION

KOMOBI PRO

Driving telemetry

All KOMOBI CITY services plus all the professional driving metrics and the circuit mode. Pay only once and don't worry about more payments.

Connectivity included:

  • No extra fees
  • SIM card integrated and included in the price
  • Three years of connectivity included
  • *What happens after the three years? More information below

219,95

DEVICE + APP + CONNECTIVITY

With this smart motorcycle device you will enjoy:
    1. Two types of anti-theft alarm:
      • Motion alarm: you will receive an alert on your mobile in case of any small impact or movement of your motorcycle
      • Area alarm: virtual perimeter created around your vehicle and you will be notified if it leaves this area

    2. Route registration: save and view all your routes
    3. GPS Tracker: know the position of your motorcycle at any time and place
    4. Professional driving metrics: acceleration, maximum and average speed, distance, roll angle and gas brake.
    5. Circuit mode: lap timer
With the purchase of this device, you will have included:

  • Smart keychain: identifies the driver and automatically activates / deactivates the alarm when you are near your motorcycle
  • Installation material: adhesive, cables and instructions for installation
  • SIM card integrated in the device: no additional fee
  • 8GB internal memory: allows registration of up to 65,000 routes
Once the three years have passed, to renew the service for another three years, you will only have to pay the renewal fee of only 24.95€. This fee is a one-time payment, not a subscription or monthly payment.
  • GNSS satellite location: 24h high precision motorcycle location
  • Bluetooh 4.2
  • 3M brand extra strong adhesive
  • Compatible with all motorcycle models
  • Route registration with professional metrics
  • 2400mAh internal battery with automatic charging when starting the motorcycle
  • Small size (7.8 × 6.3 × 1.9 cm)
  • Alarm warning in case of theft
  • Low consumption system for energy saving
  • User ID
  • Degree of protection IP65 and UL94
  1. Choose the location: thanks to its size and its resistance to splashes and dust, you can install it both inside and outside the motorcycle. The only requirement is it must be a completely flat surface so that the adhesive sticks properly.
  2. Prepare the surface: Before gluing the device, the area must be cleaned. Use a damp cloth and clean the surface thoroughly. Once ready, review the area by cleaning it in the same direction.
  3. Paste the device: remove the protection and press on it for one minute
  4. Connect it to the battery: Loosen the battery screws and insert the cable terminals (blue to the positive terminal and red to the negative). Tighten the screws again.
  5. Set up the device with the app: Download the application, sign up and start the calibration. Once the process is finished, everything will be ready to enjoy KOMOBI.
Abrir chat
💬 Do you need help?
Hi rider! 🏍 Do you need help?
Powered by